Titanium Grade 5
Titanium Grade 5 (Ti-6Al-4V) is an alpha-beta titanium alloy with much higher strength than commercially pure titanium. It retains good corrosion resistance but is selected differently from Grade 2 because of its alloying and mechanical behavior.
Titanium Grade 5 Information
Titanium Grade 5 (Ti-6Al-4V) is an alpha-beta titanium alloy with much higher strength than commercially pure titanium. It retains good corrosion resistance but is selected differently from Grade 2 because of its alloying and mechanical behavior.
Metallic winding and compatible ring components where service conditions are suitable.
| UNS Number | R56400 |
|---|---|
| Common Name | Ti-6Al-4V |
| Common Product Specification | ASTM B265 |
| Common / Applicable Specification | ASTM B265 (plate/sheet/strip) |
| Typical Gasket Use | Metallic winding and compatible ring components where service conditions are suitable. |
Titanium Grade 5 Chemical Composition
Reference composition limits are shown below. Exact requirements should be confirmed against the applicable product specification and certified material documentation.
| Element / Constituent | Symbol | Composition / Information |
|---|---|---|
| Aluminium | Al | 5.5–6.75 |
| Vanadium | V | 3.5–4.5 |
| Iron | Fe | 0.40 max. |
| Oxygen | O | 0.20 max. |
| Carbon | C | 0.08 max. |
| Nitrogen | N | 0.05 max. |
| Hydrogen | H | 0.015 max. |
| Titanium | Ti | Balance |
Titanium Grade 5 Mechanical Properties
Reference room-temperature properties are shown for a commonly supplied condition. Exact requirements depend on product form, size, heat treatment and governing specification.
| Property | Reference Value | Unit / Basis |
|---|---|---|
| Tensile Strength | 895 min. | MPa |
| 0.2% Offset Yield Strength | 828 min. | MPa |
| Elongation | 10 min. | % |
Values shown are engineering reference data, not universal design allowables. Final procurement and design must use the governing specification, exact product form/condition and certified material test documentation.
Titanium Grade 5 Physical & Service Information
Reference physical properties and service considerations relevant to material selection for Spiral Wound Gaskets.
| Density | Approx. 4.43 g/cm³ |
|---|---|
| Structure | Alpha-beta titanium alloy |
| Strength Behaviour | High specific strength compared with commercially pure titanium. |
| Corrosion Behaviour | Generally good, but not identical to commercially pure Grade 2 in every chemical environment. |
| Service Selection | Use exact product specification and heat-treatment condition for final design values. |
Specify Titanium Grade 5 for your gasket
Share your gasket dimensions, service conditions and quantity for Titanium Grade 5 material options and pricing.