Material Specifications
Material specifications for spiral wound gaskets. Confirm the required material grade, product form and standard edition with our technical team.
ASTM Specifications
- Stainless steel
ASTM A240
Plate, sheet and strip specifications for stainless steel. Confirm the required grade and product form.
View standard - Nickel–copper
ASTM B127
Flat-rolled nickel–copper alloy materials, including Monel 400, supplied as plate, sheet or strip.
View standard - Pure nickel
ASTM B162
Plate, sheet and strip requirements for Nickel 200 and low-carbon Nickel 201.
View standard - Nickel alloys
ASTM B168
Plate, sheet and strip for specified nickel alloys, including Alloys 600 and 601.
View standard - Titanium
ASTM B265
Titanium and titanium alloy strip, sheet and plate. Specify the required grade and delivery condition.
View standard - Nickel–iron–chromium
ASTM B409
Plate, sheet and strip for specified nickel–iron–chromium alloys. Check grade and heat-treatment requirements.
View standard - Corrosion-resistant alloys
ASTM B424
Plate, sheet and strip for nickel–iron–chromium–molybdenum–copper alloys, including Alloy 825.
View standard - Alloy 625
ASTM B443
Flat-product specifications covering Alloy 625 and other specified nickel alloys. Confirm the required heat-treated condition.
View standard - Historical reference
ASTM B463
Former plate, sheet and strip specification for UNS N08020 (Alloy 20). Withdrawn in 2026; review the applicable replacement.
View standard - Zirconium
ASTM B551
Zirconium and zirconium alloy strip, sheet and plate. Confirm the specified grade and condition.
View standard - Corrosion-resistant alloys
ASTM B575
Plate, sheet and strip for specified low-carbon nickel alloys, including C-276 and C-22.
View standard - Precipitation-hardening alloys
ASTM B670
Nickel alloy plate, sheet and strip requirements for high-temperature service, subject to the specified grade and condition.
View standard - Tantalum
ASTM B708
Tantalum and tantalum alloy plate, sheet and strip. Match the grade and dimensions to the application.
View standard
SAE Specifications
No SAE material specifications have been added yet.
BSI Specifications
No BSI material specifications have been added yet.
BS EN Specifications
-
Stainless steel
EN 10088-2
Stainless steel sheet, plate and strip for general purposes.
View standard -
Heat-resisting materials
EN 10095
Heat-resisting steel and nickel-alloy flat products for elevated-temperature service.
View standard -
Pressure-service stainless steel
EN 10028-7
Stainless steel flat products for pressure purposes.
View standard -
Creep-resisting alloys
EN 10302
Creep-resisting steel and nickel-alloy flat products for service under sustained high-temperature stress. The standard excludes aerospace and pressure-purpose specifications.
View standard -
PTFE semi-finished products
EN ISO 13000-1
Requirements and designation for unfilled PTFE semi-finished products, including sheet used to manufacture sealing components.
View standard -
Mica flat materials
BS EN 60371-3
Mica paper and rigid mica sheet references: subparts 3-2 and 3-3, with gasket application context.
View standard
ISO Specifications
- Corrosion-resistant stainless steel
ISO 16143-1
Technical delivery requirements for corrosion-resistant stainless steel flat products for general purposes.
View standard - Stainless steel chemistry
ISO 15510
Chemical composition and designations for stainless steels; a companion reference to product specifications.
View standard - Stainless steel for pressure purposes
ISO 9328-7
Stainless steel flat products for pressure service, with chemical and room-temperature mechanical requirements.
View standard - Nickel and nickel alloys
ISO 6208
Nickel and wrought nickel-alloy plate, sheet and strip, with composition and condition-specific tensile requirements.
View standard - Unfilled PTFE
ISO 13000-1
Requirements and designation for unfilled PTFE semi-finished products, including moulded sheet and skived sheet, tape and film.
View standard - PTFE test methods
ISO 13000-2
Preparation of test specimens and determination of properties for PTFE semi-finished products.
View standard - Titanium flat products
ISO 7209
Technical delivery conditions for titanium and titanium-alloy plate, sheet and strip.
View standard - Titanium designations
ISO 23515
Designation system for titanium and titanium alloys based on composition and impurity levels.
View standard - Heat-resistant flat products
ISO 4955
Heat-resistant steels and alloys for flat products used in elevated-temperature environments.
View standard
DIN Specifications
Original DIN standards
- Nickel-alloy sheet and strip
DIN 17750
Properties of sheet and strip made from nickel and wrought nickel alloys.
View standard - Titanium sheet and strip
DIN 17860
Technical delivery conditions for titanium and titanium-alloy strip, sheet and plate.
View standard - PTFE-based gasket sheets
DIN 28091-3
Requirements and testing for ptfe-based gasket sheets, used together with DIN 28091-1.
View standard - Expanded-graphite gasket sheets
DIN 28091-4
Requirements and testing for expanded-graphite gasket sheets, used together with DIN 28091-1.
View standard
DIN EN and DIN EN ISO adoptions
- Stainless steel
DIN EN 10088-2
Stainless steel sheet, plate and strip for general purposes.
View standard - Heat-resisting materials
DIN EN 10095
Heat-resisting steel and nickel-alloy flat products for elevated-temperature service.
View standard - Pressure-service stainless steel
DIN EN 10028-7
Stainless steel flat products for pressure purposes.
View standard - Creep-resisting alloys
DIN EN 10302
Creep-resisting steel and nickel-alloy flat products for service under sustained high-temperature stress. The standard excludes aerospace and pressure-purpose specifications.
View standard - Unfilled PTFE
DIN EN ISO 13000-1
Requirements and designation for unfilled PTFE semi-finished products, including moulded sheet and skived sheet, tape and film.
View standard - PTFE test methods
DIN EN ISO 13000-2
Preparation of test specimens and determination of properties for PTFE semi-finished products.
View standard -
Glass-backed mica paper
DIN EN 60371-3-6
Requirements for flexible mica paper reinforced with glass fabric and impregnated with B-stage epoxy resin.
View standard
IS Specifications
No IS material specifications have been added yet.
Need Assistance with Material Specifications?
Share your flange details and service conditions for technical support and a tailored quotation.