Titanium Grade 5
Titanium Grade 5 (Ti-6Al-4V) is an alpha-beta titanium alloy with much higher strength than commercially pure titanium. It retains good corrosion resistance but is selected differently from Grade 2 because of its alloying and mechanical behavior.
Titanium Grade 5 Information
Titanium Grade 5 (Ti-6Al-4V) is an alpha-beta titanium alloy with much higher strength than commercially pure titanium. It retains good corrosion resistance but is selected differently from Grade 2 because of its alloying and mechanical behavior.
Metallic winding and compatible ring components where service conditions are suitable.
| Material specification | ASTM B265 |
|---|---|
| Specified grade / UNS | Titanium Grade 5 R56400 |
Titanium Grade 5 Chemical Composition
ASTM B265 · Grade-specific requirements
| Element / requirement | Value |
|---|---|
| N % | ≤0.050 |
| C % | ≤0.080 |
| H % | ≤0.015 |
| Fe % | ≤0.40 |
| O % | ≤0.20 |
| Al % | 5.5–6.75 |
| V % | 3.5–4.5 |
| Residuals % | ≤0.10 each / ≤0.40 total |
| Ti | Balance |
Titanium Grade 5 Mechanical Properties
ASTM B265 · Grade-specific requirements
| Product form / condition | Tensile min (MPa) | Yield min (MPa) | Elongation min (%) | Hardness | Yield max (MPa) | Bend test |
|---|---|---|---|---|---|---|
| Annealed · Sheet / strip / plate | 895 | 828 | 10 | — | — | 9T / 10T |
ASTM B265 Grade Reference
Titanium Grade 5 R56400
The chemical and mechanical tables on this page use the ASTM B265 requirements for this grade, including the product conditions listed in the standard overview.
Specify Titanium Grade 5 for your gasket
Share your gasket dimensions, service conditions and quantity for Titanium Grade 5 material options and pricing.