Incoloy 800 · ISO 4955
Incoloy 800 is presented here as X8NiCrAlTi32-21 (4876-088-00-I) under ISO 4955. Heat-resistant steels and alloys for flat products used in elevated-temperature environments.
X8NiCrAlTi32-21
Designation: 4876-088-00-I
Data edition: ISO 4955:2016
Incoloy 800 4876-088-00-I
Incoloy 800 is presented here as X8NiCrAlTi32-21 (4876-088-00-I) under ISO 4955. Heat-resistant steels and alloys for flat products used in elevated-temperature environments.
Selected Table 2 compositions and Table 6 flat-product requirements. The exact ISO designations control these rows; the website material names are navigation references.
Related grades
3 material references with ISO 4955 data.
Incoloy 800 properties
Select a table to compare requirements.
| Element | Mass % |
|---|---|
| C | 0.05–0.10 |
| Si | ≤1.00 |
| Mn | ≤1.50 |
| P | ≤0.015 |
| S | ≤0.015 |
| Cr | 19.0–23.0 |
| Ni | 30.0–34.0 |
| Mo | — |
| N | — |
| Other elements | Al: 0.15–0.60; Ti: 0.15–0.60; Cu ≤0.70 |
Composition in mass %. ≤ denotes a maximum; ≥ denotes a minimum; paired values are ranges. — means no numerical limit is provided in the cited data, not zero.
| Form | Thickness (mm) | Condition | Test direction | Rp0.2 (MPa) | Rp1.0 min (MPa) | Rm (MPa) | A80 min (%) | A min (%) | Other requirements |
|---|---|---|---|---|---|---|---|---|---|
| Flat products | 0.5–75 | +AT | Transverse | 170 | 210 | 450–680 | 28 | 30 | HB ≤192 |
Room-temperature properties for the stated product form and condition. Proof strengths and elongation are minima unless a range is shown. A80 uses an 80 mm gauge length below 3 mm thickness; A uses 5.65√S₀ from 3 mm thickness. +AT means solution annealed.